Application of digital technology in the repair of functional and aesthetic defects in patients with acid erosion and severe attrition: a case report.

Noncarious lesions, a multifactorial condition encompassing tooth attrition, abrasion, and erosion, have a surge in prevalence and required increased attention in clinical practice. These nonbacterial-associated tooth defects can compromise aesthetics, phonetics, and masticatory functions. When providing full-arch fixed occlusal rehabilitation for such cases, the treatment strategy should extend beyond by restoring dentition morphology and aesthetics. This report details a complex case of erosive dental wear addressed through a fully digital, full-arch fixed occlusal rehabilitation. A 4D virtual patient was created using multiple digital data sources, including intraoral scanning, 3D facial scanning, digital facebow registration, and mandibular movement tracing. With a comprehensive understanding of the masticatory system, various types of microinvasive prostheses were customized for each tooth, including labial veneers, buccal-occlusal veneers, occlusal veneers, overlays, inlays, and full crowns, were customized for each tooth. The reported digital workflow offered a predictable diagnostic and treatment strategy, which was facilitated by virtual visualization and comprehensive quality control throughout the process.

Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study.

AIM: This study aimed to compare the efficacy of autogenous onlay and inlay grafts for anterior maxillary horizontal ridge augmentation. MATERIALS AND METHODS: This randomized clinical trial was performed on 14 patients with a deficient partially edentulous anterior maxillary ridge (3-5 mm in width). Patients were randomized and grouped into two equal groups: Group A was treated with symphyseal autogenous bone block, which was placed and fixed buccally as an onlay graft, and group B: was treated with symphyseal autogenous bone block, which was interpositioned and fixed in space created between buccal and lingual cortex as inlay graft. Patients were evaluated clinically and radiographically to evaluate the increase of bone width at [Baseline, immediate postoperative (T0)] and six months post-graft (T6). RESULTS: A total of 14 patients (8 males and 6 females) with age range from 20 to 43 years old with a mean of 42.1 years were involved in our study. Radiographically, there was a significant statistical difference in comparing between two groups for the creation of a horizontal alveolar bone at T0. In the inlay group, the mean preoperative bone width was 3.9 ± 0.3 mm at T0 and 5.7 ± 0.5 mm at T6. While in the onlay group, the mean preoperative bone width was 3.7 ± 0.7 mm at T0 while at T6 the mean bone width was 6.1 ± 0.8 mm. This was statistically significant. CONCLUSION: Inlay block graft appears to be a successful treatment option for horizontal ridge augmentation in the maxillary arch. CLINICAL SIGNIFICANCE: both techniques are viable techniques for augmentation of atrophic alveolar ridge with uneventful healing. How to cite this article: Elsayed AO, Abdel-Rahman FH, Ahmed WMAS, et al. Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study. J Contemp Dent Pract 2024;25(2):107-113.

Accuracy of Dental Restorations Fabricated Using Milling vs 3D-Printed Molds: A Pilot Study.

PURPOSE: To compare the accuracy of 12 different dental restorations fabricated with milling or 3D-printed molds and robotically controlled casting. MATERIALS AND METHODS: Twelve dental restorations (11 inlays and onlays and 1 crown) were made per restoration type, one per each of the 12 different teeth models (total of 24 restorations). On each tooth preparation, two restorations were manufactured using different CAD/ CAM techniques: (1) milling and (2) robotically controlled casting and 3D-printed molds. In addition, twolayer restorations were manufactured with 3D-printed molds. The marginal and internal gaps were evaluated at 120 points per restoration based on micro-CT 3D imaging. Internal gaps were evaluated using a replica technique with silicone. RESULTS: Median values (interquartile ranges) for marginal gaps, middle internal gaps, and central internal gaps were significantly lower for 3D-printed mold restorations (44.3 [65.4] µm, 95.4 [96.2] µm, and 104.6 [78.1] µm) compared to milled restorations (58.4 [93] µm, 145.9 [85.8] µm, and 138.6 [65.7] µm). Internal gaps in the 3D-printed mold group were 6% to 51% smaller than in the milled group. CONCLUSIONS: The accuracy of restorations fabricated with 3D-printed molds may be preferable compared to milled restorations, except in the case of crown restoration. However, additional studies with a larger number of samples and different types of restorations are needed to confirm the results.

Noninvasive assessment of novel nanohybrid resin cement adaptation using cross-polarization optical coherence tomography.

OBJECTIVES: Zein-coated magnesium oxide nanoparticles (zMgO NPs) can potentially improve cement adaptation to the tooth-restoration interface, which would aid in minimizing marginal leakage and secondary caries. The aim of this study was to assess the effect of incorporating zMgO NPs on the adaptation of self-adhesive resin cement using cross-polarization optical coherence tomography (CP-OCT) and scanning electron microscopy (SEM). METHODS: Resin inlays were fabricated to be cemented in Class-I cavities of extracted human molars. All specimens were randomly divided into five groups (n = 10), and the resin inlays were cemented using self-adhesive resin cement with various concentrations of zMgO NPs (0% [control], 0.3%, 0.5%, 1%, 2%). Characterization was done by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and SEM. The specimens were examined for interfacial adaptation under CP-OCT. Floor and wall adaptation measurements were analyzed by software on 20 B-scans, and samples were sectioned for interfacial measurement by SEM. RESULTS: Results for CP-OCT and SEM showed a statistically significant increase of adaptation in the floor and wall of resin cement filled with zMgO NPs compared to the control. The samples enhanced with 0.3% and 0.5% showed a statistically significantly better adaptation in floor and wall in CP-OCT and SEM. However, there was no significant difference between the 1%, 2%, and control groups for CP-OCT and SEM analysis. SIGNIFICANCE: The incorporation of zMgO NPs in self-adhesive resin cement can enhance the cement's properties by significantly improving its wall and floor adaptation.

Digitally manufactured partial coverage restorations: is it time to down the impression trays or still a work in progress?

DATA SOURCES: Pubmed, EMBASE, Scopus, Web of Science and Cochrane library databases were used as the data sources for this systematic review. Manual search of the reference lists of the included studies was also conducted. STUDY SELECTION: The aim of the systematic review was to compare a fully digital workflow to a fully conventional workflow in the fabrication of partial coverage restorations. Partial coverage restorations were defined as inlays, onlays, overlays and endocrowns. Four independent calibrated reviewers screened studies that fulfilled a predefined PICOS framework. Population was specified as an abutment tooth requiring a partial coverage restoration. The intervention was a fully digital workflow compared to a fully conventional workflow. Outcomes were accuracy, marginal and internal fit, success, survival, complication rates and patient-reported outcomes. Study design included both clinical and in vitro studies. DATA EXTRACTION AND SYNTHESIS: A total of 23 articles were included in qualitative synthesis ranging from 2007 to 2021. Twenty-one of these were in vitro studies. Two authors independently reviewed the included articles, performed data extraction, and evaluated the risk of bias via an adapted Checklist for Reporting In Vitro studies (CRIS) for in vitro studies and Reporting Randomised Clinical studies (RoB2) for clinical studies. RESULTS: Seventeen studies assessed the marginal and internal fit of onlay and inlay restorations, eight of which found that a conventional workflow demonstrated improved fit compared to digital, whilst the remaining nine studies found the contrary. Differing methods were utilised across the studies to assess fit, including: the silicone replica method, microcomputed tomography, microscopy and software-based measurements. Similar fracture strengths were reported between both conventional and digital workflows in three studies. One clinical study assessed survival rates of both pressed and CAD/CAM ceramic restorations and found the survival outcomes to be similar after seven years. No studies were found that investigated patient-reported outcomes or endocrowns. CONCLUSIONS: No consensus was reached as to whether the digital or conventional workflow is better.

Two­year clinical performance of indirect restorations fabricated from CAD/CAM nano hybrid composite versus lithium disilicate in mutilated vital teeth. A randomized controlled trial.

TRIAL DESIGN: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. The aim of this trial was to compare the two-year clinical performance of partial indirect restorations fabricated from CAD/CAM nano-hybrid composite and ceramic lithium disilicate blocks using the modified USPHS criteria. METHODS: In two parallel groups (n = 50 restorations), fifty participants having mutilated vital teeth with a minimum of two remaining walls were randomly enrolled in this trial and received indirect restorations of either nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland) or Lithium Disilicate (IPS Emax CAD). The restorations were assessed using modified USPHS criteria by two independent blinded assessors at baseline, six months, one-year and two years follow-up visits. Categorical and ordinal data were presented as frequencies and percentages. Categorical data were analyzed using the chi-square test. Ordinal data were analyzed using the Mann-Whitney U test for intergroup comparisons and Freidman's test followed by the Nemenyi post hoc test for intragroup comparisons. Numerical data were presented as mean and standard deviation values. They were analyzed for normality using the Shapiro-Wilk test. Data were found to be normally distributed and were analyzed using the independent t-test. The significance level was set at p ≤ 0.05 within all tests. RESULTS: Forty-eight participants received the allocated intervention and completed the follow-up periods. There was a statistically significant difference between both tested materials for all USPHS criteria regarding Marginal integrity and Marginal discoloration at six-months Follow-up, but with no statistically significant difference at one- and two-year follow-up. CONCLUSIONS: Both materials showed an acceptable, successful clinical performance along the two-years follow-up period. CLINICAL RELEVANCE: The CAD/CAM nano-hybrid composite blocks are as reliable as Lithium disilicate for restoring mutilated vital teeth.

Fracture behavior of short fiber-reinforced CAD/CAM inlay restorations after cyclic fatigue aging.

The aim of this study was to assess the fracture behavior of molar teeth restored with MOD inlays made of experimental short fiber-reinforced CAD/CAM composite block (SFRC CAD) before and after cyclic fatigue aging. Standardized MOD cavities were prepared on 60 intact mandibular molars. Three groups of CAD/CAM made inlay restorations (Cerasmart 270, Enamic, and SFRC CAD) were fabricated (n = 20/group). All restorations were luted with self-adhesive dual-cure resin cement (G-Cem One). Half of restored teeth per each group (n = 10) were quasi-statically loaded until fracture without aging. The other half underwent cyclic fatigue aging for 500,000 cycles (Fmax = 150 N) before being loaded quasi-statically until fracture. Then, the fracture type was visually inspected. The microstructure and elemental content of CAD/CAM materials were assessed using SEM and EDS. Two-way analysis of variance (ANOVA) was used to statistically examine the data, and it was followed by the Tukey HSD test (α = 0.05). ANOVA demonstrated that both material type and aging had a significant effect (p < 0.05) on the load-bearing capacity values of the restorations. Teeth restored with SFRC CAD showed significantly the highest (p < 0.05) load-bearing capacity (2535 ± 830 N) after fatigue aging among all groups. SEM images showed the ability of short fibers in SFRC CAD composite to redirect and hinder crack propagation. With regard to fracture mode, Enamic group revealed 85% of catastrophic failure (vs. 45% and 10% for Cerasmart 270 and SFRC CAD, respectively). Large MOD cavities on molar teeth were most favorably restored with SFRC CAD inlays, yielding the highest load-bearing capacity and more restorable failures.

Long-term clinical outcome of three-unit fixed-fixed posterior zirconia ceramic inlay-retained FDPs with a modified design.

OBJECTIVES: To assess the long-term clinical outcome of posterior inlay-retained fixed dental prostheses (IRFDPs) with a modified design made from zirconia ceramic. METHODS: In 30 patients thirty 3-unit IRFDPs were placed to replace 7 premolars (4 in the maxilla, 3 in the mandible), and 23 first molars (15 in the maxilla, 8 in the mandible). Preparations were accomplished in agreement with the general principles for ceramic inlay restorations and modified with a short retainer-wing bevel preparation within the enamel at the buccal and oral sides. The frameworks were milled from 3Y-TZP ceramic, and the pontics were veneered with feldspathic ceramic. All IRFDPs were bonded with a phosphate monomer containing luting resin after air-abrasion of the intaglio surfaces. The patients were recalled 6-12 months after placement, and then annually. Kaplan-Meier analysis was used to calculate the survival and complication rates of the IRFDPs. RESULTS: The mean observation time was 10.6 ± 1.5 years. The 10-year cumulative survival rate was 89% with 4 failures, two of them were due to deep secondary caries with loss of retention, one due to repeated debonding with enamel fractures, and one due to generalized progressive periodontitis. The most common complication was chipping of the veneering ceramic (20.1%). Eighteen IRFDPs were free of any type of complication up to 15.4 years, which corresponds to a 10-year cumulative success rate of 70.4%. CONCLUSION: The long-term clinical performance of modified IRFDPs made of veneered zirconia ceramics was favorable after 10 years, therefore, they represent a treatment alternative to replace posterior single missing teeth. CLINICAL SIGNIFICANCE: Zirconia-based IRFDPs fabricated in the modified design may represent a substance-preserving alternative to conventional posterior FDPs to replace posterior single missing teeth, particularly in cases where implants cannot be placed, and when the adjacent teeth already have small restorations or defects.

Do onlays and crowns offer similar outcomes to posterior teeth with mesial-occlusal-distal preparations? A systematic review.

OBJECTIVE: Teeth prepared for mesial-occlusal-distal (MOD) restorations have a significant risk of cusp fracture. Crowns and onlays can provide cusp coverage to reinforce posterior teeth at risk. Onlays are often more conservative of tooth structure which may be an advantage for teeth with large MOD preparations. It remains uncertain how onlays and crowns compare for posterior teeth with MOD tooth structure loss. The purpose of this systematic review was to compare the resistance to fracture, success rate, survival rate, and failure rate of teeth with MOD preparations restored with onlays or crowns. MATERIALS AND METHODS: An electronic search queried Medline (PubMed), Embase (Ovid), Scopus, the Cochrane Library, and grey literature (OpenGrey) from database inception through April 29, 2023. RESULTS: After eliminating duplicates and irrelevant records, 32 manuscripts were assessed. Only three publications met the criteria for inclusion. Most exclusions were due to poor reporting of restorative design and the amount of tooth structure remaining, or due to combining various restorative designs. Due to the limited sample size and high heterogeneity, no meta-analysis was conducted. One study observed a better outcome for onlays and two observed no difference. All three studies reported the mode of failure for crowns as more catastrophic whereas teeth with onlays could be salvaged. CONCLUSIONS: Onlays may be an advantageous alternative to crowns for teeth with MOD preparations, but the level of evidence is insufficient to draw meaningful conclusions. CLINICAL SIGNIFICANCE: Current evidence is insufficient to determine whether onlays or crowns are providing a different outcome when used to restore posterior teeth with MOD tooth structure loss. However, the fracture of teeth with MOD tooth structure loss restored with onlays appears to be less catastrophic than when restored with crowns.

Effect of different intraoral scanning strategies on the marginal and internal fit of CAD-CAM inlay restorations: An in vitro study.

STATEMENT OF PROBLEM: Whether the scanning strategy of intraoral scanners (IOSs) affects the accuracy of the digital recording for an indirect ceramic inlay restoration is unclear. Furthermore, which strategy would be optimal and most effective is uncertain. PURPOSE: The purpose of this in vitro study was to evaluate the impact of 3 different scanning strategies using the Carestream CS 3700 IOS on the marginal and internal fit of a mesio-occluso-distal (MOD) ceramic inlay restoration. MATERIAL AND METHODS: A typodont master model (ANA-4 VCER; Frasaco) was used with a standardized preprepared MOD inlay maxillary first molar typodont tooth (ANA-4 ZP16 CER99-008; Frasaco) (N=30). These inlay preparations were scanned with the CS 3700 IOS using 3 different scanning strategies: linear, wave, and S-figure scanning strategies. Each scan strategy group was scanned 10 times for all groups to obtain 30 standard tessellation language (STL) files. Thirty restorations were milled from lithium disilicate CAD blocks (IPS e.max; Ivoclar AG) and cemented into their typodont-prepared inlay cavities. A single examiner used a stereomicroscope to measure the marginal and internal gaps at the predetermined points. A 1-way ANOVA was used for the statistical analysis, followed by the Tukey post hoc test with Bonferroni adjustment. All tests were 2-tailed (α=.05). RESULTS: All scanning strategy groups demonstrated statistically significant differences for the marginal and internal fit of the inlay restorations (P<.001). Overall, the linear scanning strategy showed the lowest mean marginal and internal gap values (29.2 ±3.6 µm and 39.0 ±6.4 µm), followed by the wave scanning strategy, which had comparable mean marginal and internal gap values: 49.1 ±3.6 µm and 48.2 ±6.0 µm, respectively. The S-figure scan strategy had the highest mean marginal and internal gap values: 50.2 ±12.6 µm and 71.3 ±7.7 µm, respectively. CONCLUSIONS: Inlay restorations scanned by the linear scan strategy had the best marginal and internal fit when scanned with the CS 3700 IOS.

An in vitro study measuring marginal gaps of inlay restorations fabricated from different CAD-CAM materials after thermocycling.

BACKGROUND: Many monolithic machined materials have been introduced and provided a suitable mechanical and physical properties for inlay restorations. However, there is shortage in the studies evaluating the marginal adaptation using these materials. PURPOSE: This study aimed to compare the effect of fabricating inlay restorations from 3 different CAD-CAM materials on marginal gaps before and after thermocycling. MATERIALS AND METHODS: Sixty human premolars were randomly divided into 3 groups (n = 20) according to the material used: (e.max CAD, Ivoclar AG, Schaan, Liechtenstein), (HC, Shofu, Koyoto, Japan) and (Brilliant Crios, Coltene, Altstätten, Switzerland) (n = 20). A scanning electron microscope (SEM) (JSM- 6510 lv, JEOL, Tokyo, JAPAN) was used to for measuring the marginal gaps after cementation of inlay restorations. The magnification was adapted to 250x. Marginal gaps were revaluated with SEM after thermocycling. The temperatures of baths were 5 and 55 °C was applied for a total of 5000 cycles. All data were statistically analyzed by using ANCOVA to demonstrate if there were any statistically significant differences between the gap measures after thermocycling of the three independent (unrelated) groups. A Bonferroni adjustmen was used to perform post hoc analysis (α = 0.05). RESULTS: Post-intervention marginal gap was statistically significantly lower in group EX (110.8 µm) which was statistically significant compared with group SF (112.5 µm) (mean difference=-1.768, P = .007) and group BR (113 µm) (mean difference=-2.272, P = .001), however, in. comparing SF and BR groups, there was no significant difference (mean difference=-0.5, P = .770). CONCLUSIONS: Thermocycling affected the marginal gaps of composite based restoration and resin-modified ceramics widely. However, it had a very small effect on glass ceramics marginal adaptation. CLINICAL IMPLICATIONS: The marginal gaps of CAD-CAM inlays varied according to material used (ceramic based, combination, or resin based). Thermocycling has a minor effect on the marginal adaptation of lithium disilicate glass-ceramic inlays, where it affected the margin of resin-modified ceramic and composite based inlays greatly. Using lithium disilicate glass-ceramic might improve the clinical longevity of inlay restored teeth.

Deep Margin Elevation: Next-Level Adhesive Dentistry to Avoid Surgical Crown Lengthening.

Surgical crown lengthening (SCL) is the treatment of choice to ensure healthy tissues when subgingival tooth defects encroach on the biologic width.1 However, restorative techniques employing adhesive dentistry may provide viable alternatives to or complement SCL in select cases without the repercussions of surgical bone removal and open interproximal spaces. One such clinical technique, deep margin elevation (DME), employs a direct restoration to relocate the cervical margin of small subgingival defects of posterior teeth supragingivally. The "elevated" margin simplifies impression-making and bonding of indirect restorations, especially inlays and onlays. Recent scientific systematic literature reviews indicate favorable clinical outcomes and suggest that DME restorations made with scrupulous care have high success rates and are compatible with periodontal health. Optimal working field isolation, meticulous placement of matrices, proper bonding and buildup procedure, as well as regular maintenance and follow-up are essential for success. This article provides an overview of this approach.

Influence of the Crystallization Firing Process on Marginal and Internal Adaptation of Silicate-based Glass-ceramic Inlays Fabricated With a CAD/CAM Chairside System.

OBJECTIVE: Computer-aided design/computer-aided manufacturing (CAD/CAM) systems are widely used in dental treatment. Clinicians can use chairside CAD/CAM technology, which has the advantage of being able to fabricate inlays on the same day. We aimed to evaluate the effects of crystallization firing processes, fabrication methods (one-step and two-step), and materials on marginal and internal adaptations of silicate-based glass-ceramic all-ceramic inlays fabricated with CAD/CAM chairside systems. METHODS: Ten artificial mandibular left first molars were prepared with standardized ceramic class II mesialocclusal (MO) inlay cavities. Optical impressions were obtained using CEREC Omnicam Ban. IPS e-max CAD (IE), (Ivoclar Vivadent, Schaan, Liechtenstein), Initial LiSi Block (LS) (Hongo, Bunkyoku, Tokyo, Japan), VITA Suprinity (SP), (Vita Zahnfabrick, Bad Säckingen, Germany), and Celtra Duo (CD) (Ivoclar Vivadent, Schaan, Liechtenstein) (n=10) were milled using CEREC MC XL (Bensheim, Germany). IE and SP were crystallization-fired using CEREC Speed Fire. The silicone replica technique was used for the measurement of internal (axial and pulpal walls) and marginal (cervical and occlusal edge) adaptations. The adaptations were measured using a thin layer of light-body polyvinyl siloxane impression material placed between the master tooth inlay preparation and restoration. Marginal and internal adaptations of IE, LS, SP, and CD were measured using a stereomicroscope (500×). For IE and SP, marginal and internal adaptations were measured before and after the crystallization firing process. Data analyses were conducted using one-way ANOVA and the Tukey test. For IE and SP, marginal and internal adaptations before and after the crystallization firing process were analyzed using the t-test. The significance level was set at α=0.05. RESULTS: One-way ANOVA revealed statistically significant differences in occlusal and cervical edge marginal adaptations among the material groups (p<0.001). The Tukey HSD test revealed a significant difference in marginal occlusal and cervical edge adaptations between LS and CD groups and IE and SP groups (p≤0.05). For IE and SP inlays, the t-test revealed a significant difference between occlusal and cervical edge adaptations before the crystallization firing process and those after the crystallization firing process, with the latter group showing a more significant discrepancy in adaptation than the former group (p≤0.05). CONCLUSIONS: Fabrication methods (one- and two-step) affected the marginal adaptation compatibility but not internal compatibility of MO inlays. The crystallization firing process affected the marginal adaptation of inlays using lithium silicate or lithium disilicate glass-ceramics. However, adaptation to the cavity was considered clinically acceptable for all materials.

Finite element stress analysis of dental cement application on endocrown and onlay restoration.

The aim of the study was to evaluate the influence of resin cement material types on tooth with endocrown and onlay restorations. The first molar was scanned using Micro-CT and underwent a modelling process to obtain the 3D model for computational simulation. Eight models were simulated in the current study with two loading conditions (720N vertical load and 200N oblique load), two types of restoration (onlay and endocrown restorations), and two resin cement variants (dual-cure resin cement and light-cure resin cement). The tooth with onlay restoration showed a significant stress reduction (up to 70%) when using light-cure resin cement compared to dual-cure resin cement. In contrast, types of cement did not affect stress distribution in the tooth with endocrown restoration. The current study found that dual-cure resin cement was preferable in Endocrown and Onlay restorations, due to dual-cure resin cement provided better bond strength compared to light-cure resin cement.

Three-dimensional finite element stress analysis of surface-mounted inlays in repairing pulp-penetrating non-carious cervical lesion of maxillary first premolar.

OBJECTIVES: This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods. METHODS: The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LDNP, LDB, LDP, LDBP, LUNP, LUB, LUP, and LUBP. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%. RESULTS: LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement. CONCLUSIONS: For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.

Clinical evaluation of lithium disilicate versus indirect resin composite partial posterior restorations - A 7.8-year retrospective study.

OBJECTIVE: To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations and risk factors associated with restoration deficiencies and failures. METHODS: Patients (n = 91) receiving LidiSi (73.1%) and RBC (36.9%) inlays/onlays/overlays between 2007 and 2017 were selected. The restorations were evaluated using the modified U.S. Public Health Service criteria. The survival of the restorations was analyzed using the Kaplan-Meier method and log rank test. Factors affecting the occurrence of deficiencies were examined by logistic regression analysis. This was performed with the use of the Generalized Estimating Equation model including Repeated measurements (GEER), with the consideration that the same patient had several teeth in the sample. Risk estimation was conducted for each evaluated criterion (p < 0.05). RESULTS: The survival of LidiSi and RBC restorations were 96.8% and 84.9%, respectively after a mean observation period of 7.8 ± 3.3 years. The annual failure rate was 0.2% for LidiSi and 1.0% for RBC. The probability of survival was above 98% for both restorations in the first 6 years, however, it dropped to 60% for RBC by the end of the 15th year. For both materials the reasons for failure included secondary caries, restoration fracture, and endodontic complication. In addition, LidiSi also failed due to tooth fracture, while RBC due to marginal gap formation and loss of retention. Among the evaluated risk factors, material of restoration (OR=6.8, CI95%:3.1-14.9), oral hygiene (OR=8.0, CI95%: 2.9-22.1], and bruxism (OR=1.9, CI95%: 1.1-3.3) showed a significant impact on the evaluated criteria. SIGNIFICANCE: LidiSi and RBC restorations showed similarly excellent 6-year survival, however, in the long term significantly more failures should be expected for RBCs.

Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part II - full-contour resistive crowns with vertical preparation.

Restoration of posterior teeth with different extents of tissue loss has been a matter of debate in the literature. There are several recommendations and guidelines on when, how, and why to perform adhesive restorations (onlays, overlays, and endocrowns) or resistance form restorations (full-contour resistive crowns). In Part I of this three-part article series, the authors focused on adhesive partial restorations. In that article, the evidence was extensively described, and a clinically reasonable thought process was suggested for these decisions based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. Now, in Part II, the focus is on clinical decisions for full-contour resistive crowns regarding their indications based on remaining tooth structure, materials, and different preparation designs as well as the particularities of vertical marginal preparations, perio-restorative considerations, and esthetic challenges.

Evaluation of different designs for posterior cantilever zirconia inlay-retained fixed dental prostheses in missing tooth replacement: Stage one results with 18-month follow-up assessment.

OBJECTIVES: This clinical study aimed to investigate the outcomes and survival rates of different variations of inlay-retained fixed dental prostheses (IR-FDPs) composed of monolithic zirconia ceramic. The IR-FDPs with a single-retainer design were used for replacing missing mandibular second premolars. The research evaluated the effectiveness and longevity of these prostheses in clinical settings. METHODS: A total of 30 IR-FDPs (n = 30) were placed for 27 female patients who presented with missing mandibular second premolar teeth. For this study, the mandibular first molar was chosen as a retainer for the cantilever IR-FDPs and the study involved a random assignment of participants into three distinct groups, each comprising 10 individuals (n = 10). The criterion for the grouping was the retainer design: inlay ring (IR), lingual coverage (LC), and occlusal coverage (OC). The three groups included mesial inlay box with the same dimensions (3 mm height, 3 mm width and 2 mm depth). All IR-FDPs were manufactured using monolithic high translucent 3Y zirconia and the connector area to the cantilever pontic was adjusted to dimensions of 3 × 3 mm for all designs. The restorations were bonded using adhesive resin cement. The clinical and radiographic evaluations of the restorations were conducted for a duration of 18 months, following the modified FDI (World Dental Federation) criteria. RESULTS: The restorations were observed in stage one for a period of 18 months. Only one restoration in group LC was debonded after 10 months and re-bonded. The clinical quality of all crowns and the patient's satisfaction were high. No adverse soft tissue reactions around the crowns were observed and only one abutment in group IR was endodontically treated after 12 months. CONCLUSIONS: Zirconia cantilever IR-FDPs offer a viable short-term treatment option for replacing missing posterior teeth, providing esthetic and functional benefits while minimizing invasiveness. Over an 18-month observation period, these prostheses have demonstrated a remarkable survival rate of 100% and a success rate of 96.6%. These findings suggest the effectiveness and reliability of zirconia cantilever IR-FDPs as a short-term solution for replacing missing posterior teeth. CLINICAL SIGNIFICANCE: Zirconia cantilever IR-FDPs could present a practical solution for addressing posterior tooth loss, especially in cases where implant placement is not recommended and conventional fixed dental prostheses entail excessive invasiveness.

Fracture Resistance of Endodontically Treated Premolars Using Nanohybrid Composite, Fiber-Reinforced Composite, Horizontal Glass Fiber Posts, and Ceramic Inlays: An In Vitro Study.

INTRODUCTION: This study evaluated the resistance to fracture of endodontically treated premolars (ETPs) with mesio-occluso-distal (MOD) cavities filled with nanohybrid composite (NHC), fiber-reinforced composite (FRC), horizontal glass fiber posts (HFP), and ceramic inlays (CI). METHODS: Eighty-four intact maxillary premolars were taken, and endodontic treatment was performed followed by MOD cavity preparations (except in the control group). They were distributed into 7 groups based on type of restoration: intact teeth (control group), ETP + MOD (not restored), NHC, FRC + NHC, HFP + NHC, FRC + HFP + NHC, and CI groups. Samples were subjected to universal testing machine until the fracture occurred and failure mode was visually inspected. RESULTS: Mean and standard deviation of fracture resistance of the 7 groups ranged from 265.6 ± 68.0 N to 1023.7 ± 76.5 N. The highest reading was noted for intact teeth followed by FRC + HFP + NHC group and then the CI group, with no significant difference among the 3 groups. The lowest reading was noted for the ETP + MOD group. Maximum unrepairable fractures were seen in the ETP + MOD and CI groups. CONCLUSION: FRC + HFP + NHC combination and CIs increased the resistance to fracture of ETPs significantly.

Diagnosis, treatment planning, and comprehensive restoration of a patient with Costello syndrome: rationale and application of indirect composite resin onlays.

Patients with a complex problem set involving multiple levels of altered structure challenge the clinician to develop an individualized, appropriate treatment plan. Dentofacial deficiency, occlusal problems, and loss of tooth structure require intervention to establish stability and regain function, speech, esthetics, and masticatory muscle comfort. The comprehensive examination must quantify each problem to specify the diagnosis for realistic treatment planning. The clinical case of a patient with Costello syndrome is presented to illustrate essential concepts in diagnosis and treatment of complex cases, including (1) Global Diagnosis of anterior esthetic relationships, (2) occlusal analysis with diagnostic casts verified in centric relation, (3) comprehensive restoration previewed with a diagnostic wax-up and removable acrylic resin overlay, (4) adhesive monobody composite resin onlays that preserve tooth structure, and (5) programmed occlusion, quantified with digital occlusal analysis, to ensure stability and comfort. Costello syndrome is a neurodevelopmental syndrome causing multisystem effects, including a distinctive craniofacial phenotype, cardiovascular disease, intellectual disability, growth hormone deficiency, and dental abnormalities such as delayed dental development, bruxism, and demineralized enamel lesions. In the present case, quantification of the patient's problem set allowed precise treatment planning that resulted in predictable restoration.